When sending it full gas down the run you want confidence that your bike will perform as it should and no material has earned its keep on the downhill circuit like our M5 aluminium. The reasons for this are stacking but primarily it can all be summed up by stiffness light overall weight and strength. That's why you'll find that our Demo 8 I Alloy was constructed from it in order to make your next shred-sesh that much more fun.
It's more than a one-trick-pony though as it also features a 1.5-inch forged head tube to enhance most of these qualities. As for the ride the Demo 8 pairs our S3 Geometry with an asymmetric frame design that ensures plenty of access a roomy top tube for added control ultra-short nimble chainstays a low bottom bracket that keeps you feeling planted and a slack front end that provides the utmost in responsive handling at speed.
For suspension this Demo features 200mm up front via a RockShox BoXXer RC 650b and 200mm of travel at the rear controlled by a custom-tuned FOX VAN RC. Together the combo ensures that you'll be able to rocket over any terrain with confidence.
And when you add in a build kit consisting of SRAM's powerful Guide RS brakes a durable one-by SRAM drivetrain and our legendary Butcher & Slaughter DH tires you get a bike that wants nothing more than to be pushed harder and faster.
| FRAME | M5 alloy, S3 Geometry, carbon seatstay, BB30, full internal cable routing, 135mm dropouts, lipped and sealed cartridge bearing pivots, replaceable derailleur hanger, 200mm of travel |
| FORK | RockShox BoXXer Team 27.5, coil spring, S: Extra soft spring, M: Soft spring, L: Medium spring, XL: Firm spring, 200mm of travel, Charger Damper, compression adjust, rebound adjust, alloy steerer, 48mm offset, Maxle Lite DH |
| REAR SHOCK | FOX/Specialized Van RC, rebound & compression adjust, 9.5x3.0" |
| FRONT HUB | Specialized disc, alloy flange & disc mount, sealed cartridge bearings, 20mm thru-axle, 32h |
| REAR HUB | Specialized, sealed cartridge bearings, 12x135mm spacing, 32h |
| SPOKES | DT Swiss Industry, stainless, 3-cross, 2.0" |
| RIMS | Roval 27.5, alloy, 24mm internal width |
| INNER TUBES | Standard, Presta valve |
| FRONT TYRE | Butcher, DH casing, 27.5 b x2.5", 60 TPI, wire bead |
| REAR TYRE | Butcher, DH casing, 27.5 b x2.3", 60 TPI, wire bead |
| CRANKSET | Custom SRAM Descendant, BB30, 7050 alloy arms w/ Gamut bashguard, 165mm |
| CHAINRINGS | Steel, 30T |
| BOTTOM BRACKET | SRAM BB30, 83mm |
| SHIFT LEVERS | SRAM X7, trigger |
| REAR DERAILLEUR | SRAM GX, Type 2.1, short cage |
| CASSETTE | SRAM PG-1030, 10 speed, 11-36 last three cogs removed |
| CHAIN | SRAM PC-1031, 10-speed w/ PowerLink |
| FRONT BRAKE | SRAM Guide R, hydraulic disc, organic pads, Guide S4 4-piston caliper, 200mm rotor |
| REAR BRAKE | SRAM Guide R, hydraulic disc, organic pads, Guide S4 4-piston caliper, 180mm rotor |
| HANDLEBARS | Specialized DH, 7050 alloy, 8-degree backsweep, 6-degree upsweep, 27mm rise, 800mm, 31.8mm clamp |
| GRIPS | Specialized Sip Grip, half-waffle, S/M: regular thickness, L/XL: XL thickness |
| STEM | Specialized Direct Mount DH Stem, two-piece, forged alloy, 45mm |
| SADDLE | Body Geometry Phenom Comp, hollow Cr-Mo rails, 143mm |
| SEATPOST | Specialized, 6061 alloy, 2-bolt clamp, 0mm setback, 30.9mm |
| SEAT BINDER | Alloy, 36.9mm |
| PEDALS | Specialized Bennies, 6061 alloy body, sealed cartridge bearings, 4.5mm removable pins |
Please note: Manufacturers can sometimes change the specification of the products from time to time.
with a £ 0.00 deposit.
The total charge for credit is £ 0.00.
Corley Cycles acts as a credit broker and not the lender and only offers credit products from Secure Trust Bank PLC trading as V12 Retail Finance. Corley Cycles is authorised and regulated by the Financial Conduct Authority. Credit provided subject to age and status. We may receive a commission if your application is successful, and the amount may vary depending on the product chosen and the amount of credit taken out.
Consumer credit services are only available to over 18s and subject to status.
Credit
is provided by V12 Retail Finance Limited, a trading name of
Secure
Trust Bank Plc. which is registered in England and Wales:
541132.
Registered Office: One Arleston Way, Solihull, B90 4LH. Secure
Trust
Bank Plc is authorised by the Prudential Regulation Authority
and
regulated by the Financial Conduct Authority and the Prudential
Regulation Authority with registration number 204550. For more
information please visit www.v12retailfinance.com
If you are intending to use finance as your payment option, please note we will only ship your order to your billing address, and not to an alternative delivery address.
This is for estimation purposes only. Actual Finance Application is Completed During Checkout.
