Colnago CC01 Carbon Integrated Handlebar & Stem

£789.95
This item / size combination is out of stock. Please contact the store as more may be on order. You can call 01908 311424 or email us here.
Black
Part Number:

3MIT.CC1.100.41C.00BK.22

Colnago, together with the C68, also introduces a new integrated handlebar, made in a single piece, a real monocoque, stiff where and how it is needed and lighter than the average of similar accessories.

In addition to a particularly successful design and remarkable technical characteristics, the new cockpit has been designed to ensure the widest possible range of options for precise riding. In fact, the available measurement combinations are as many as 16.

The stem length starts from 80mm up to 140mm. Speaking instead of the handlebar width, it is important to note that the measures are not typical, proposing odd measures to replace the more traditional even measures.

The shape of each handlebar includes a small Flare. The width at the terminals is in fact wider than 2cm. A handlebar with a width of 41cm (centre/centre) measured at the levers, will have a width at the terminals of 43cm (centre/centre).

The measurements refer to the centre/centre width measured at the height of the brake lever positioning.

The handlebars have a 122mm Drop and 80mm Reach. The only size that has a different geometry is the 37, which has a Drop of 119mm, a Reach of 75mm and a Flare of 14mm.

It should be noted that the new handlebar integrates a convenient multitool into the upper lid of the stem that you will no longer have to carry in your pocket.

Comment author

Peter van den Heuvel

Hello, Can you tell me the height of the individual spacer in mm for the handlebar CC.01 of a Colnago C68? Kind regards, Peter van den Heuvel

Store Staff

kellyt

Hi Peter

Thank you for your email. Spacers normally come in 5mm or 10mm increments which enables you to get to as near to your required height as possible.

All the best