Mistral: MISTRAL ADVENTURE - DSFL 10’6 x 31” x 6” (320cm x 78cm x 15cm) x 285L & 11’6 x 31” x 6” (350cm x 78cm x 15cm) x 316L INFLATABLE SUP COMBO SETA complete ready to Go-SUP package. The highly popular Mistral Adventure makes an ideal first time board. Incorporates EVA non slip deck, nose scuff pad towing D-ring, rear D-Ring leash point, single universal fin box and bow cargo net. The Adventure is nimble and stable. Includes adjustable polycarbonate blade alloy shaft paddle, dual action pump, fin, coiled leash, repair kit and wheeled travel bag. Incorporates DSFL material. See Product Composition and Construction.COLOUR: Digitally printed coral reef theme, patterned EVA pad.PRODUCT BENEFITSDouble Skin Fusion Layer Drop StitchGenuine 13,000 threads per inch2,600 more threads than conventionalFront mounted cargo elasticsUniversal fin box for universal finsEVA foam non-slipBow protectorTowing D-RingCarry handleLeash ringRobust constructionRepair kitAdjustable PaddlePolycarbonate blade / alloy shaftDual action pumpFin includedCoiled leash includedWheeled travel bag Repair kit includes: PVC patches, PVC contact glue, valve spanner.TECHNICAL INFORMATION YOU ARE A NOVICE TO INTERMEDIATE PADDLERThe Mistral Adventure 10’5 x 31” x 6” (320cm x 78cm x 15cm) x 285L inflatable SUP offers nimble paddling and stability and suits novice paddlers. Can support riders optimally to around 80kg.The Mistral Adventure 11’6 x 31” x 6” (350cm x 78cm x 15cm) x 316L inflatable SUP offers nimble paddling and stability and suits novice paddlers. Can support riders optimally to around 100kg. PRODUCT COMPOSITION and CONSTRUCTIONDouble Skin Fusion Layer (DSFL) Technology Drop Stitch Fabric. Uses 13,600 stitches per inch over the usual 12,000 making the board stiffer for no added weight gain. SUP board consists of polyvinyl chloride (PVC) woven polyester drop stitch construction. Non-slip material is composed of ethylene-vinyl acetate (EVA) foam. Contact adhesive consisting of poly-chloroprene polymers. Elastic bungee cord composed of both natural and manufactured rubber, poly carbonate fin-box, stainless steel retainers. Polycarbonate paddle blade and aluminium shaft. STOCK ADVICEAvoid storing in direct high UV sunlight to prolong material longevity. Rinse with fresh water to evacuate all salt crystals. When dry, store in dry, well ventilated place avoid humid heat sources. TESTSDeveloped and tested by our design team in Holland and the UK. Components have been tested to ensure they meet nominal expectations of performance within reasonable expectations of form, function and budget. MAINTENANCESUP technology has advanced over the years, however require the end-user to take good care through responsible ownership. The advantages of iSUP ownership are clearly related to convenience of transportation and storage, cost and low impact use.Rinse salt water from board after use with freshTowel or air dry before stowageDo not drag over rough surfacesStore out of strong UVDo not store in a humid placeAvoid sand falling into the valveDo not over inflateInflate within (-) 2 psi of recommendationDo not store fully inflatedReduce to 5psi if storing inflatedDo not store when wetFold neatly avoiding fin boxAFTER WINTER STORAGEIf you’re getting your iSUP out of storage after a long winter, it’s advised you take some time to do some basic maintenance checks at home.Inflate to recommended PSIIf stored deflated check fold lines are OKMake a close inspection of the seams for any leaksDo same with the valve and re-tighten using the valve spannerCheck fin box and fin fitmentCheck D-Ring connectionsCheck deck padCheck for any discolouration due to bacteriaWash and scrub board with cool soapy waterObserve for any ‘bubbling’ caused by leaksMake a note of PSI and leave for 48hrsCheck PSI and note any lose of pressureInvestigate any issues and address / fixFor minor none seam leak issues fix using repair kitSeam failure often requires professional inputConsider contacting inflatable boat repairers