Wolf Tooth - CAMO Direct Mount Spider Race Face

Description

• Handmade in Minnesota, USA by Wolf Tooth
• Machined from 7075-T6 aluminium
• ED coated steel bolts included

Compatibility

• This is a spider for use with the Race Face Cinch system
• 3 different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth:
  • M8 (minus 8mm - dished towards the frame) is for standard 49mm chainline. This is for use on bikes with 135mm QR, 142mm thru axle, and some 148mm bikes.
  • M5 (Boost - minus 5mm - dished towards the frame) is for 52mm chainline that boost bikes may need. This link explaining 148mm ""Boost"" spacing will help you decide if you need the M5 or M8.
  • P2 (plus 2mm - dished outwards away from the frame) is for fat bikes that have 190/197 rear spacing but use a 100mm spindle. This is now very common on production fat bikes to keep the q-factor slimmer

Installation notes:

• You will be able to access all bolts without removing the spider
• Line up the little dot on the ring with the dot on the spider. Don't worry, you cannot install the ring in the wrong rotational orientation.
• Be sure the bosses on the spider ""plug in"" to the chainring.
• Torque bolts only to 4-5 Nm and use blue Loctite thread locker