The worldÔÇÖs most successful downhill / race pedal just got even better! Dual-chamfered edges reduce costly rock strikes, and combined with proven traction pad technology Mallet DH maximises your performance.┬áMallet pedals┬áfeature a double sided open design allowing┬áfor quick and reliable engagement with minimal┬ámud clogging. A two piece body keeps the┬áweight down whilst providing a strong and┬ádurable platform. Mallet DH are the clipless pedal of┬áchoice by most Pro World Cup riders.The ability to set the release angle of the cleats to either 15┬░ to 20┬░ means you can be really active on the pedal whilst still remaining attached to the bike.┬á The concave pedal body gives a flat pedal feel with the assurance that you are connected to the bike.Release angle: 15┬░ to 20┬░Cleat: Premium brass cleats includedWarranty: 5 yearsWeight: 479g per pairPlatform: Extruded/machined aluminiumWings: cast stainless steelSpring: 300 series spring stainless steelSpindle: Forged scm435 chromoly steelQ-factor: 57mmInner bearing:┬áigus LL-glide bearing┬áhas been exclusively formulated for crankbrothers.┬á It performs in even the most adverse conditions out on the trailsOuter bearing:┬áenduro cartridge bearing┬áis designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bikeDouble seal system┬ácombines a double lip internal seal and a new external seal to keep water and debris from entering the pedalTraction pins: 8mm adjustableExcellent mud-shedding: using the very open designed pedal platformDual chamfered edges to reduce rock strikesRibbed body for extra traction when unclipped4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedalExtremely lightweight: pedal design is very simple with only a few key partsIncreased float: 6┬░ of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal.┬á This allows for improved rider control and bike handlingFit adjustment: crankbrothers premium cleats can be adjusted for either 15┬░ or 20┬░ release angle.┬á Zero-float cleats can be purchased separatelycrankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051).┬á Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle